GX112

A potentiostat image of the product GX112

A potentiostat image of the product GX100 series

An image of the super compact potentiostat product GX100 series which is an electrochemical sensor and biosensor

Specifications

Scan Range:	±2 V
Best Compliance Voltage:	-3 V; +2,1 V
Best Maximum Current:	1,5 mA
Applied DC Voltage Resolution:	537 µV
Current Ranges:	8 ranges + autorange (1,5mA; 300µA; 30µA; 15µA; 7,5µA; 1,8µA; 70nA; 10nA)
Current Resolution (of max value in each range):	0,002%
Sampling Rate:	1000 SPS
Best Current Resolution @1.000SPS:	346 pA
Noise Level @1.000SPS:	-52 dB
Minimum Noise @1.000SPS:	2.2 nA
Best Current Resolution @1SPS:	13 pA
Noise Level @1SPS:	-103 dB
Minimum Noise @1SPS:	13 pA
Electrode Connections:	WE1, WE2, RE, CE
DC Methods:	CV, DPV, SWV, LSV, NP, CA, MA
Galvanostatic Measurement Methods:	PSA
Open Circuit Potential:	±1,6 V
Bi-Potentiostat WE2 Mode:	Duplicate, Bias to GND, Bias to WE1
Bi-Potentiostat Range:	Duplicate mode: ±2 V ±ΔE
	Primary mode: -1,1 V; +0,9 V ±ΔE
	Ground mode: -0,9 V; +1,1 V ±ΔE
Impedance Measurement Methods:	EIS, IMP
Impedance Measurement Frequency Range:	15 mHz – 200 KHz
Power (Max):	150 mW
Host Interface:	USB Type C
Compatibility:	PC, Android
Size (LxWxH):	39 x 18 x 9 mm³
Weight:	6 gr

Bi-potentiostat/ EIS Analyser

100G12.000

±2V, 1pA, 1,5mA max. EIS 200KHz

GX112 is the most sophisticated member of the GX100 Super-compact Series devices. It is capable of performing Electrochemical Impedance Spectroscopy and real-time Open Circuit Potential measurement, as well as all popular Amperometric and Voltammetric electrochemical protocols. GX112 also has the Bi-potentiostat capability that allows to use with four electrode cells (WE1/WE2/RE/CE), as well as three electrode (WE/RE/CE) and two electrode (WE/RE-CE) setups.

950€

Sensor Interfaces

Please choose the sensor interface that the device will come with.
GX100 interfaces are user replaceable. You can select more than one standard as interface and replace the sensor interface when necessary by plugging out the installed one and plugging in the other model.